Spare Parts

AirCraft Air Impact Wrench Service Kit – Bearings & Washer (4, 5, 7, 10, 27, 35, 42, 43) for AT0003 (AT0003-SK01) At a Glance: Service kit with bearings, washers/seals and small hardware to refresh the AT0003’s rotating support points and reduce wear-related play. When an impact wrench starts feeling rough, noisy, or develops unwanted play, worn bearings and washers are often the silent troublemakers. The AirCraft AT0003-SK01 service kit focuses on the bearing and washer components (parts re..

AirCraft Air Impact Wrench Service Kit – Air Flow Regulator (8 / 10–12) for AT0003 (AT0003-SK02) At a Glance: Air flow regulator service kit for the AirCraft AT0003 to restore controllable power output and dependable air control. When an impact wrench loses its “feel” — power that surges, a regulator that won’t hold setting, or air leaking around the control area — the air flow regulator components are usually worn or contaminated. The AirCraft AT0003-SK02 service kit replaces the key air co..

AirCraft Air Impact Wrench Service Kit – Air Inlet (5–9) for AT0003 (AT0003-SK03) At a Glance: Air inlet service kit for the AirCraft AT0003, including inlet fitting components, spring and ball/valve parts to keep air delivery clean and leak-free. If your impact wrench is struggling for power, hissing at the inlet, or feeling inconsistent under load, the air inlet assembly is a likely culprit. The AirCraft AT0003-SK03 service kit replaces the key inlet components (parts 5–9) that control and..

AirCraft Air Impact Wrench Service Kit – Valve Kit (2–4 / 19–20) for AT0003 (AT0003-SK04) At a Glance: Valve service kit for the AirCraft AT0003 including key valve components, seal ring and mounting hardware to restore crisp air control. If your AT0003 has started to feel inconsistent — delayed spool-up, power that comes and goes, or air leaking around the control area — the internal valve assembly is often the root cause. The AirCraft AT0003-SK04 valve kit replaces critical valve component..

AirCraft Air Impact Wrench Service Kit – Trigger Complete (13–14) for AT0003 (AT0003-SK05) At a Glance: Complete trigger replacement kit for the AirCraft AT0003, including trigger lever and pin to restore crisp, dependable control. A trigger that feels sticky, sloppy or inconsistent can make an impact wrench frustrating (and unsafe) to use. The AirCraft AT0003-SK05 trigger complete service kit replaces the key trigger components (parts 13–14) that you rely on every time you squeeze for power..

AirCraft Air Impact Wrench Service Kit – Oil Inlet (15–18) for AT0003 (AT0003-SK06) At a Glance: Oil inlet/lubrication service kit for the AirCraft AT0003, including oil plug/inlet components and spring-loaded parts to support proper internal lubrication. Pneumatic impacts work hard, and they rely on one quiet hero to survive the long haul: lubrication. If the oil inlet components are worn, leaking, or not feeding properly, internal parts run drier, hotter and wear faster. The AirCraft AT000..

AirCraft Air Impact Wrench Service Kit – Rear Cover & Scuff (35–40) for AT0003 (AT0003-SK07) At a Glance: Rear cover and protective scuff/bumper service kit for the AirCraft AT0003, including rear cover, gasket/seal and mounting screws for a proper refit. The rear cover does more than close off the back of the tool—it helps protect internal components, supports correct sealing, and keeps dust and workshop grime where it belongs (outside). The AirCraft AT0003-SK07 service kit replaces the rea..

AirCraft Air Impact Wrench Service Kit – Rotor Kit (28 / 29 / 31–34) for AT0003 (AT0003-SK08) At a Glance: Air motor rotor service kit for the AirCraft AT0003, including rotor assembly components and motor plates/housing parts for a full motor refresh. When an impact wrench starts losing punch, running unevenly, or sounding rough, the air motor is usually telling you it’s tired. The rotor assembly sits at the centre of that motor, and when wear sets in, performance drops fast. The AirCraft A..

AirCraft Air Impact Wrench Service Kit – Hammer & Anvil (21–26 / 42) for AT0003 (AT0003-SK09) At a Glance: Hammer and anvil service kit for the AirCraft AT0003, including the impact mechanism assembly components to restore proper striking action. The hammer and anvil set is where an impact wrench earns its keep. When these parts wear, the tool may still spin, but it won’t hit like it should—resulting in weak breakaway, inconsistent torque, or harsh, uneven impacts. The AirCraft AT0003-SK09 s..

AirCraft Air Impact Wrench Service Kit – Rotor Blades Set (6pc) (30) for AT0003 (AT0003-SK10) At a Glance: 6-piece rotor blade (vane) set for the AirCraft AT0003 air motor to refresh the motor’s sealing surfaces and restore performance. Rotor blades (also called vanes) are the working heart of an air motor. As they wear, the motor loses sealing efficiency—meaning slower spool-up, less power, and a tool that feels “tired” even with good air supply. The AirCraft AT0003-SK10 rotor blade set rep..

AirCraft Air Impact Wrench Service Kit – Main Housing (1 / 41) for AT0003 (AT0003-SK11) At a Glance: Main housing (body) replacement kit for the AirCraft AT0003, supplied with gasket plate to ensure proper sealing and correct assembly. The main housing is the backbone of your impact wrench—holding the air motor, valve system and impact mechanism in correct alignment while also protecting everything from knocks and workshop abuse. If the body is cracked, damaged, or the sealing face has been ..

AirCraft Air Impact Wrench Service Kit – Hammer Gasket & Washers (4 / 6 / 8 / 9 / 14 / 23) for AT0004 (AT0004-SK01) At a Glance: Sealing and spacing service kit for the AirCraft AT0004 impact mechanism, including gaskets, washers and small retaining components for a tight, correct rebuild. Inside every impact wrench, the hammer mechanism needs correct spacing and reliable sealing to deliver consistent power. If gaskets flatten, washers wear, or small retaining parts are missing, the tool can..